The strategic agenda of almost all ITAR projects is the metamorphic response to orogeneses. The practical approach taken is the application of currently available metamorphic tools in characterising metamorphism in different terranes and domains that make up an orogenic system. These results form the basis for constraining the spatial variation in metamorphic parameters across whole orogens and the evolution of these parameters with time in different tectonic settings. Currently active metamorphic projects investigating the metamorphic response to orogenesis in a wide range of tectonic settings, include; the Yilgarn Craton, Damara Orogen, Malawi Granulites, Arunta Province, Himalayas, Zambezi Belt and Oman. Outcomes can be found in project sheets listed by geographic location. Additional ongoing metamorphic projects are investigating multiple granulite events in the Albany-Fraser Orogen and Malawi Mosaic, seafloor alteration on Macquarie Island and metamorphic response in the Damara Orogen and provinces of the Archaean Yilgarn Craton.
Below are links to summaries of thematic metamorphic projects:
• Thermal gradients and metamorphic field gradients [1]
• Metamorphic analysis of rock flow [2]
• Granulite grade reworking of granulites [3]
• Silica-undersaturated sapphirine granulites [4]
• Re-equilibration without re-crystallization [5]
• Tasmanian eclogite [6]
[1] Classification of metamorphic gradients and their utilization as indicators of tectonic regimes.
Ben Goscombe, David Gray, Chris Carson
SGTSG conference, Townsville (2005)
Metamorphic gradients, where thought to be time equivalent, are first order variables that are dependent upon the tectonic setting and crustal architecture of orogens. Consequently, metamorphic gradients offer a unique way to encompass a whole orogenic system and have the potential to act as discriminatory tools to determine palaeo-tectonic setting in metamorphic belts. Metamorphic gradients are simply the variation in metamorphic variables (pressure–P, temperature–T and average thermal gradient–G) with respect to a length scale. Metamorphic gradients can be divided into two broad types. (1) Average thermal gradient (G - ºC/km) is the ratio of temperature over depth and not to be confused with instantaneous thermal gradient. (2) Metamorphic field gradients, which are the variation in a metamorphic parameter with respect to a horizontal length scale, either along an orogen (DT/Dy, DP/Dy and DG/Dy) or across an orogen (DT/Dx, DP/Dx and DG/Dx).
[TOP] [7]
[2] Metamorphic response in orogens of different obliquity, scale and geometry.
Abstract from: Gondwana Research, volume 14, 2008.
Investigation of material flow within transpressional orogens must involve integration of structural and metamorphic datasets. To illustrate the problems in documenting flow vectors we present integrated structural-metamorphic datasets from two transpressional systems; the Kaoko Belt in Namibia and the Kalinjala Shear Zone in South Australia. These orogens experienced widely differing metamorphic responses to transpressional deformation. Integration of kinematic and metamorphic datasets from the Kaoko Belt indicate shallow up-plunging extrusion trajectories in the orogen core, and show that the maximum stretching direction pattern matches the inferred flow vectors. High-grade domains (800-840ºC and 7.0-8.0 kb) in the orogen core developed low-angle upward-verging maximum stretching direction trajectories, whereas a low-grade domain (575-600ºC and 5.0-5.5 kb) in the orogen core has downward-verging lineation trajectories. The barometric differential between these high-grade and low-grade domains is entirely consistent with the angle of plunge of maximum stretching directions within the high-grade domains that were extruded obliquely, for the amount of lateral shear estimated for the orogen core. The Kalinjala Shear Zone in South Australia contrasts strongly with the Kaoko Belt. In this example, the high-grade and high-strain shear zone core of the orogen, experienced high-T/high-P metamorphism with low thermal gradients of 21-26 ºC/km and steep decompressive P-T paths. The lower-grade external domains experienced lower-T/lower-P metamorphism with high thermal gradients of 35-37 ºC/km. Sub-horizontal maximum stretching directions do not match the vertical extrusional flow in the high-grade core that is indicated by the metamorphic data. This comparison shows that in general and on a gross-scale, maximum stretching directions do not necessarily correlate with the real flow vectors experienced during orogenesis. In some cases maximum stretching direction recorded by deformation structures is to some degree decoupled from the vertical component of material flow. Consequently, information pertaining to flow is often partitioned into information derived from deformation structures and information derived from the metamorphic record. These two datasets must be used in concert to obtain realistic constraints on first-order material flow trajectories at orogenic-scales. The horizontal component of flow is typically best recorded by structural fabrics (maximum stretching direction and sense of shear), whereas the vertical component is typically best recorded by metamorphic information, such as P-T paths, temperature over depth ratio and metamorphic field gradients (i.e. DT, DP and DG) across the orogen.
Diagrammatic models comparing inferred flow vectors and developed metamorphic field gradients in two contrasting examples of transpressional orogenesis. (a) Kaoko Belt example has a co-temporal composite metamorphic belt geometry and is centred on a wider and longitudinally complex Orogen Core. The structural and metamorphic datasets are mutually consistent, and the real flow vectors in the Orogen Core can be resolved to some degree, involving oblique, shallow up-plunging trajectories (Goscombe et al., 2005). (b) Kalinjala Shear Zone example is centred on the high-grade orogen core that experienced extrusional flow vectors, most plausibly oblique and steeply up-plunging. However, information on the vertical and horizontal components of flow are decoupled; the horizontal component recorded by structural fabrics only and the vertical component recorded by metamorphic data only. The true flow vectors experienced cannot be resolved. Note that peak metamorphic field gradients are interpreted to be approximately time equivalent across these orogens. The extruded high-grade orogenic cores in these two examples have very different metamorphic field gradients for variation in pressure and temperature over depth ratio.
The broad classification of transpressional orogens, with distinct groupings shaded and based on a simplified suite of parameters in geometric and metamorphic space. The data is derived from transpressional orogens documented in the literature and is compared to examples of high-angle convergent orogens such as the Himalayas. Orogen geometry is summarized by the α/θ ratio between general plunge of the maximum stretching direction within the orogen core (α) and the inclination of the orogenic grain (θ). Patterns in metamorphic response are summarized by the gradient in temperature over depth ratio (ΔG) from the low-grade external domain to the high-grade orogen core of the different metamorphic belts.
[TOP] [7]
[3] High-Grade Reworking of Central Australian Granulites: Metamorphic Evolution of the Arunta Complex
BEN GOSCOMBE
Geology Department, University of Melbourne, Parkville 3052, Victoria, Australia
See Journal of Petrology 33, 917-962 (1992).
[TOP] [7]
[4] Silica-undersaturated sapphirine, spinel and kornerupine granulite facies rocks, NE Strangways Range, Central Australia
B. GOSCOMBE
Department of Geology, Melbourne University, Parkville, Victoria 3052, Australia
See Journal of Metamorphic Geology 10, 181-201 (1992)
Key words: Arunta Block; granulite facies rocks; kornerupine; P-T paths; sapphirine.
[TOP] [7]
[5] Tectonometamorphic evolution of the Chewore Inliers:
Partial re-equilibration of high-grade basement during the Pan-African Orogeny.
Ben Goscombe, R. Armstrong1 and J.M. Barton2
Geological Survey of Zimbabwe, P.O. Box CY210, Causeway, Zimbabwe.
1Research School of Earth Science, Australian National University, Canberra, Australia.
2Geology Dept. Rand Afrikaans University, P.O. Box 524, Johannesburg, Republic of South Africa.
Keywords: Equilibrium thermodynamics, Geochronology, Metamorphism, P-T paths, Reworking, Pan-African Orogeny.
[TOP] [7]
[6] Equilibrium thermodynamics of the Lyell Highway eclogites
B. D. Goscornbe
Division of Mines and Mineral Resources Tasmania Report 1990/19
[TOP] [7]
Links:
[1] http://www.terraneanalysis.com.au/projects/metamorphism#gradient
[2] http://www.terraneanalysis.com.au/projects/metamorphism#flow
[3] http://www.terraneanalysis.com.au/projects/metamorphism#granulite
[4] http://www.terraneanalysis.com.au/projects/metamorphism#silica
[5] http://www.terraneanalysis.com.au/projects/metamorphism#equil
[6] http://www.terraneanalysis.com.au/projects/metamorphism#eclogite
[7] http://www.terraneanalysis.com.au/projects/metamorphism#top